Chrysler Voyager / Grand Voyager · 2000–present

Chrysler Voyager / Grand Voyager radio code from 99p

Voyager radios vary by year and trim. Always match the first characters of the serial to the radio family before ordering.

The code comes from the serial on the radio itself. Choose the radio family below, enter the serial and we will check it before you pay.

  • T00BE, T0MYD, TQN
  • One-off 99p
  • Code by email, usually in minutes
Code from 99p

Check your radio

Find the serial, type it in, and we will check it before you pay.

Your make
Chrysler Change

14 characters starting T00BE

Your code Price appears when the serial is valid
—

Trouble with the security check? Email support@autopincode.com and we will help you complete the order.

Secure payment by Stripe · one-off payment · no subscription

Find the serial

Where to look on a Voyager / Grand Voyager

Turn the radio on and hold preset 1, or presets 1 and 6 together, for a few seconds. Many Chrysler units show the serial on screen. If not, the serial is printed on a label on the radio casing, usually a 12- or 14-character line starting with T. On a 300C, Voyager or PT Cruiser the bezel unclips and two screws hold the radio in place.

Serial format

14 characters starting T00BE. Becker-built unit.

Serial finder for Chrysler
RADIO UNIT12V
Chrysler
S/NT00BE240271540
Made in EU · Model no. shown above
Chrysler radio label: use the serial, not the part number.

Radio families

Which radio is in your Voyager / Grand Voyager?

Voyager / Grand Voyager models were fitted with more than one radio over the years. Match the serial prefix to the family below.

Radio familySerial starts withPrice
Chrysler T00BE T00BE 99p
Chrysler T0MYD T0MYD 99p
Chrysler TM9 TM9 99p
Chrysler TQN TQN 99p

If the prefix on your label is not listed, email us before ordering and we will check it.

Enter the code

Unlocking the Voyager / Grand Voyager radio

  1. Turn the ignition on and switch the radio on. The display should show CODE.
  2. Press the preset button that matches each digit, in order. For example, press preset 1 once for the first digit, preset 2 twice for a second digit of 2, and so on.
  3. On touchscreen units, tap the four digits on the keypad and press Enter.
  4. The radio should unlock after the fourth digit. If it shows WAIT, leave the ignition on and let the timer run before trying again.

Enter the code slowly and double-check each digit. A wrong code is easier to avoid than a timed lock.

Good to know

Chrysler Voyager / Grand Voyager radio code questions

Where is the serial on a Chrysler Voyager / Grand Voyager radio?

Turn the radio on and hold preset 1, or presets 1 and 6 together, for a few seconds. Many Chrysler units show the serial on screen. If not, the serial is printed on a label on the radio casing, usually a 12- or 14-character line starting with T. On a 300C, Voyager or PT Cruiser the bezel unclips and two screws hold the radio in place.

Which Chrysler Voyager / Grand Voyager radios can you decode?

We decode Chrysler T00BE, Chrysler T0MYD, Chrysler TM9, Chrysler TQN. The radio fitted to a Voyager / Grand Voyager can vary by year and trim, so always read the serial from the unit in the car rather than assuming from the model.

How much is a Chrysler Voyager / Grand Voyager radio code?

Every code is 99p. That is a one-off payment — there is no subscription and no extra charge for the entry instructions.

What if my Voyager / Grand Voyager radio shows LOCKED or WAIT?

That means too many incorrect codes have been entered. Leave the ignition on and the radio switched on so the timer can run, then enter the correct code. If it stays locked, stop trying and contact us before the radio locks for longer.

From 99p

Check your Chrysler Voyager / Grand Voyager serial

Type the serial from your radio and see the price before you pay. Every code is 99p.

Check my code