Entry guide

How to enter a car radio code

Once you have the code, entering it is usually a sequence of preset buttons. Here are the steps for Ford, Renault and Chrysler radios, plus what to do if the display says LOCKED or WAIT.

Ford

Entering a Ford radio code

  1. Turn the ignition on and switch the radio on. The display should show CODE.
  2. Press preset 1 until the first digit is correct, then preset 2 for the second digit.
  3. Use presets 3 and 4 for the remaining two digits.
  4. Press and hold preset 5 to confirm. The radio should unlock.

If the code is rejected, check the serial and the code before trying again. Repeated wrong attempts can lock the radio for longer.

Renault

Entering a Renault radio code

  1. Switch the radio on. The display should show CODE or a four-digit prompt.
  2. Use preset 1 to set the first digit, preset 2 for the second, and so on.
  3. On some models, use the tuning up/down buttons or the steering wheel controls instead of presets.
  4. Press and hold preset 6 (or the confirm button) until the radio beeps and unlocks.

If the code is rejected, check the serial and the code before trying again. Repeated wrong attempts can lock the radio for longer.

Chrysler

Entering a Chrysler radio code

  1. Turn the ignition on and switch the radio on. The display should show CODE.
  2. Press the preset button that matches each digit, in order. For example, press preset 1 once for the first digit, preset 2 twice for a second digit of 2, and so on.
  3. On touchscreen units, tap the four digits on the keypad and press Enter.
  4. The radio should unlock after the fourth digit. If it shows WAIT, leave the ignition on and let the timer run before trying again.

If the code is rejected, check the serial and the code before trying again. Repeated wrong attempts can lock the radio for longer.

If it goes wrong

LOCKED, WAIT and ERR

LOCKED

The radio has paused after too many wrong codes. Leave it switched on with the ignition on for about 30 minutes, then try the correct code. If it says LOCKED 13, stop and contact us.

WAIT

The radio is in a timed lock. Leave the ignition on so the timer can run, often 30 to 60 minutes. Do not disconnect the battery, or the timer may restart.

ERR or CODE again

The code was rejected. Check that the serial was entered exactly right and that the code matches it. If both are correct, contact us and we will re-check the order.

Good to know

Questions people ask

Do I need to keep the engine running?

No. The ignition needs to be on so the radio has power, but the engine can be off. Running the engine is fine too; just do not switch the ignition off during the timed lock.

How many tries do I get?

It varies by radio. Assume three to five. That is why we recommend checking the serial and code before you start.

The code worked, but the radio asks again after the battery was disconnected.

Some radios re-lock when power is lost. Enter the same code again. If it is rejected, the serial or code may be wrong.

Can I enter the code with the radio out of the car?

Only if the radio has a power supply and the correct connector. It is usually easier to enter the code in the car.

From 99p

Need the code first?

Find your radio serial and check the price before you pay.

Check my code